Aqueous dispersion of 1D van der Waals Mo6S3I6 crystal using biocompatible tri-block copolymer

To achieve the stable dispersion of 1D van der Waals crystal Mo₆S₃I₆ in aqueous media, the tri-block copolymer (Poloxamer) is used as dispersant. The head group of Poloxamer, hydrophobic polypropylene oxide parts can be adsorbed to Mo₆S₃I₆ surface by hydrophobic interaction and the tail group with hydrophilic polyethylene oxide exposed to the outside of the Mo₆S₃I₆ is soluble in water and can form sufficient steric hindrance, resulting in stable aqueous dispersion in nm scale. The excellent biocompatibility of aqueous dispersed nm scale 1D Mo₆S₃I₆ was demonstrated by effective proliferation of C2C12 cells.     

明代盔甲种类及制作工艺研究

本文通过盔甲的制作及材料,区分了非金属材料的皮甲、瓠子作甲、藤甲、绵甲、纸甲以及金属材料组成的齐腰甲、齐腰明甲、缉甲、布甲、铁甲、钢甲、铜甲、锡甲等类型,并对其制作方式等进行分析。结合不同材质盔甲的使用地区、战争方式进行研究,以对明代盔甲有一个整体性的认知。     

Elastic modulus prediction based on thermal conductivity for silica aerogels and fiber reinforced composites

The speed of sound is a critical parameter in the test of mechanical and thermal properties. In this work, we proposed a testing method to obtain the elastic modulus of silica aerogel from the sound speed formulas. The solid thermal conductivity of the silica aerogel is experimentally measured for predicting the sound speeds, and then the elastic modulus is calculated based on the elasticity sound speed model. The experimental data of the solid thermal conductivity of silica aerogels with different densities are employed and the obtained elastic modulus is fitted as a power-law exponential function of the density. Two existing sound speed models and three groups of available experimental data are also employed to validate the present fitting relation, and good agreement is obtained for the silica aerogel in the density range of 150–350 kg/m³. The fitting formula can also be extended to estimate the elastic modulus of the glass fiber-reinforced silica aerogel composite. The results show that the elastic modulus of the aerogel composite is sensitive to the glass fiber volume fraction, while the thermal conductivity is weakly dependent on the glass fiber volume fraction at room temperature in the studied range of fiber volume fraction.     

Laser-assisted preparation of monolithic acidic catalysts for biomass conversion

5-(Hydroxymethyl)furfural (5-HMF) is a vital platform molecule from which a variety of high-value-added fine chemicals and polymerizable monomers can be prepared. The use of solid acids to catalyze the conversion of biomass into 5-HMF is environmentally friendly and economical. However, exploiting the high yield of 5-HMF in a highly concentrated reactant system is challenging. Herein, we present a laser-assisted method for preparing highly acidic monolithic acidic catalysts. A monolithic acidic catalyst based on metal Zr sheets was synthesized and used to catalytically convert 30 wt% fructose into 5-HMF (conversion rate: 96%; yield: 95%). The catalyst was immediately separated from the reaction solution by direct removal at the end of the reaction. Catalytic efficiency was largely unaffected after 10 cycles of use, and the same catalytic efficiency was observed after laser-regeneration, highlighting the potential industrial applicability of the developed catalyst.     

The influence of inner material with different average thermal conductivity on the performance of whole insulation system for liquid hydrogen on orbit storage

At present, several composite insulation systems were proposed that can be used for passive insulation systems, including foam-variable density multilayer insulation (VDMLI), aerogel-VDMLI and hollow glass microspheres (HGMs)-VDMLI. The passive insulation systems with different inner material (IM) showed different performances. However, the relationship between the average thermal conductivity of IM and the insulation performance of the whole system has rarely been investigated. It is of great significance for efficient configuration and matching of the passive insulation system. In this paper, a series of average thermal conductivity of IM were assumed to predict the insulation performance of the whole system at 20 K–300 K and high vacuum. In order to further illustrate the relationship between IM and MLI/VDMLI, the foam was replaced by the HGMs as 5 mm a unit forming a series of HGMs-foam-MLI/VDMLI insulation systems. The performance of the systems was investigated. After the foam was completely replaced by the HGMs, the performance of MLI and VDMLI systems was improved 33% and 13%, respectively. Moreover, each mode of heat transfer including solid conduction, radiation, and gas conduction for foam-MLI/VDMLI and HGMs-MLI/VDMLI insulation systems were calculated and analyzed.     

Exploration of amorphous hollow FeOOH@C nanosphere on energy storage for sodium ion batteries

Sodium ion batteries (SIBs) have enjoyed a high profile in recent years and gradually been commercialized to supplement the lithium-ion batteries system. However, the large volume expansion of anode materials within discharging and low electrical conductivity hinder the application of SIBs. In this work, a FeOOH@C composite was synthesized with the use of hydrothermal method and pyrolyzing of polydopamine. The amorphous FeOOH exhibits a hollow spherical structure to offer free space for buffering the volumetric variation. Furthermore, the outer carbon served as a protective shell could maintain the sphere integrity and enhance the electrical conductivity. Hence, benefiting from the achieved synergy of the hollow architecture, amorphous structure and carbon shell, the composite presented a long cycle life (316 mA h g^?1 after 500 cycles at a current density of 100 mA g^?1 and 234.5 mA h g^?1 after 400 cycles at 2 A g^?1) and high-rate performance (180 mA h g^?1 at 5 A g^?1), revealing a potential to be a promising candidate for electrode material of SIBs.     

Microstructure and hydrogen storage properties of Ti–V–Cr based BCC-type high entropy alloys

In this work, the crystal structure and hydrogen storage properties of V₃₅Ti₃₀Cr₂₅Fe₁₀, V₃₅Ti₃₀Cr₂₅Mn₁₀, V₃₀Ti₃₀Cr₂₅Fe₁₀Nb₅ and V₃₅Ti₃₀Cr₂₅Fe₅Mn₅ BCC-type high entropy alloys have been investigated. It was found that high entropy promotes the formation of BCC phase while large atomic difference (δ) has the opposite effect. Among the four alloys, the V₃₅Ti₃₀Cr₂₅Mn₁₀ alloy shows the highest hydrogen absorption capacity while the V₃₅Ti₃₀Cr₂₆Fe₅Mn₅ alloy exhibits the highest reversible capacity. The cause of the loss of desorption capacity is mainly due to the high stability of the hydrides. The higher room-temperature desorption capacity of the V₃₅Ti₃₀Cr₂₅Fe₅Mn₅ alloy is due to higher hydrogen desorption pressure. After pumping at 400 °C, the hydrides can return to the original BCC structure with only a small expansion in the cell volume.     

ZnSe/CoSe/NCDPH composites as anode materials for lithium ion batteries with high capacity and long cycle

In this paper, dopamine hydrochloride (DPH) is introduced to synthesize ZIF-8@ZIF-67@DPH in the preparation of ZIF-8@ZIF-67. ZnSe/CoSe/NC_DPH (N-doped carbon) composites are calcined in a high-temperature inert atmosphere with ZIF-8@ZIF-67@DPH as the precursor, selenium powder as the selenium source. ZnSe/CoSe/NC_DPH has high discharge specific capacity, good cycle stability and outstanding rate performance. The first discharge capacity of ZnSe/CoSe/NC_DPH is 1616.6 mAh g⁻¹ at the current density of 0.1 A g⁻¹, and the reversible capacity remains at 1214.2 mAh g⁻¹ after 100 cycles, the reversible capacity is 416.7 mAh g⁻¹ after 1000 cycles at 1 A g⁻¹. Therefore, ZnSe/CoSe/NC_DPH composites provide a new step for the research and synthesis of new stable, high-capacity, and safe high-performance lithium ion batteries. The bimetallic selenide composites not only have bimetallic active sites, but also can form synergistic effect between different metal phases, which can effectively reduce the capacity attenuation caused by volume expansion and reactive stress enrichment during lithium storage of metal oxide anode materials. Meanwhile, N-doped carbon can improve the conductivity and provide more active sites to store lithium, thus improving its lithium storage capacity.     

Microcystis aeruginosa supported-Mn catalyst as a new promising supercapacitor electrode: A dual functional material

In the present study, a Mn-supported catalyst material developed from Microcystis aeruginosa microalgae for hydrogen generation was tested as a supercapacitor electrode material for the first time. The catalyst material (MA-HCl-Mn) was examined for hydrogen generation through methanolysis of NaBH₄, and it demonstrated good catalytic activity. Symmetric and asymmetric supercapacitor cells were prepared using MA-HCl-Mn as the electrode material. The electrochemical performance of the cells were evaluated by a two-electrode system using 2 M KOH as the electrolyte. The gravimetric capacitance of the symmetric and asymmetric cells found to be 40 F/g and 71 F/g, respectively. It was concluded that MA-HCl-Mn served as a sustainable, dual functional material showing a high catalytic activity for the hydrogen generation and a promising electrochemical performance as the supercapacitor electrode.     

Plastic-containing materials as alternative reductants for base metal production

Shredder residue materials are produced after the removal of ferrous and non-ferrous fractions from end-of-life electronic equipment. Despite the high plastic content and metal value in the ash, high percentages of these materials are currently sent to landfills. In this study, the potential of utilising shredder residue material and other plastic-containing materials as reducing agents was studied. Plastic-containing materials were co-injected with coal into a zinc-fuming furnace in Boliden-Rönnskär smelter. The data obtained from the trial, such as the data from the chemical analysis of the slag and the steam production, are discussed. The observations indicate that plastic-containing material can replace up to 1?ton?h^?1 of coal without a significant decrease in the zinc reduction rate.